Filter
Top Products
1. Introduction and Installation
11
1.4 Button descriptions of the
cordless handset
A Soft keys
L To select the features or operations displayed
directly above each key (page 12).
B {C} (Talk)
L To make/answer calls (page 22, 23).
C Navigator
L To adjust volume (page 19).
L To search for a stored item (page 26).
L To select features or feature settings during
programming.
L To navigate to the next operation.
D {s} (Speakerphone)
L For speakerphone operation.
E {R} (Recall)
L To access special telephone services such as
call waiting (page 24) or for transferring extension
calls.
L The recall/flash time can be changed (feature
#72 on page 55).
F {ih} (Off/Power)
L To turn power ON/OFF (page 18).
L To hang up (page 22, 23).
L To stop an operation or programming.
G {C/T} (Clear/Mute)
L To mute your voice during a conversation. Press
again to resume the conversation.
L To erase a character/number (page 62). Press
and hold to erase all characters/numbers.
H {INT} (Intercom)
L To page or locate the base unit or another
cordless handset (page 60).
1.5 Display descriptions of the
cordless handset
Display icons
D
E
C
B
G
H
F
A
Display
icon
Meaning
w Within range of a base unit
L When flashing: Cordless handset
is searching for base unit (out of
range of base unit, cordless
handset is not registered to base
unit, no power on base unit)
x Cordless handset is accessing base
unit (intercom, paging, changing
base unit settings, etc.)
k Cordless handset is on an outside
call
y Missed call
*1
(page 29)
u Answering machine is ON (page 40)
and/or new messages have been
recorded (page 47)
n Answering machine is full.
d Answering machine answers calls
with a greeting message (page 48)
i Batteries are charging
1 Battery strength
e Alarm is ON (page 58)
d Voice enhancer is set to high or low
tone (page 22)
U Ringer volume is OFF (page 19)
f Night mode is ON (page 24)
“[2]” Cordless handset number (standby
display setting, page 56)
“-2-” Base unit number (standby display
setting, page 56)
h New SMS message received
*2
(page
33)
j Your written SMS message is over
160 characters
*2
(page 32)
m SMS memory is full
*2
L Line is being used by the base
unit or another cordless handset
L Answering machine is being used
by another cordless handset or
the base unit
FC255AL-PFQX2639ZA-en.book Page 11 Friday, April 21, 2006 1:50 PM