2. Preparation
17
2 PreparationConnections and Setup
2.1 Connections
Important:
L The unit will not function when there is a power
failure. To make calls in emergency situations,
you should connect a telephone that can
function during a power failure to the telephone
line.
2.1.1 Base unit
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
L Be sure to use the telephone line cord included in
this unit.
L Do not extend the telephone line cord.
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.
L If you use the unit with a computer and your internet
provider instructs you to install a filter (3), please
connect the telephone line cord of the unit.
2.1.2 Charger unit
Caution:
L USE ONLY WITH the included Panasonic AC
adaptor.
L The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
1 Telephone line cord
L Connect to a single telephone line jack.
2 Power cord
L Connect to a power outlet (220 V – 240 V, 50/60
Hz).
2
1
(For Australian
users)
1 AC adaptor
L Connect to a power outlet (220 V – 240 V, 50/60
Hz).
2 Hooks
L Fasten the AC adaptor cord to prevent it from
being disconnected.
3 Screws (not included)
L The charger can be mounted on the wall, if
required.
3
25 mm
3
2
1
FC255AL-PFQX2639ZA-en.book Page 17 Friday, April 21, 2006 1:50 PM