Filter
Top Products
3. Telephone
28
L To cancel erasing, press {STOP}.
2. {SET}
Note:
L The corresponding base unit phonebook item will not
be erased.
Caller ID
3.10 Caller ID service
This unit is compatible with the Caller ID service
offered by your local telephone company. To use this
unit’s Caller ID features, you must subscribe to a
Caller ID service.
Important:
L This unit will only display the caller’s telephone
number and name.
L This unit will not support future additional
telephone services.
L Depending on the service of the local telephone
company, the date/time of the call or the caller’s
name may not be displayed.
Make sure the following ring count is set to 2 or more
rings beforehand.
– TAM ring count (page 48, feature #06 on page 50)
– FAX ring count (feature #06 on page 50)
L The name display service may not be available in
some areas. For further information, please contact
your telephone company.
3.10.1 How Caller ID is displayed
The calling party’s name or telephone number will be
displayed after the 1st ring. You have the option of
whether or not to answer the call.
The unit will automatically store caller information
(name, telephone number, date and time of the call) from
the 50 most recent callers.
It is possible to view caller information one at a time on
the display (page 29) or print the entire Caller ID list
(page 78).
L When caller information is received and it matches a
telephone number stored in the unit’s phonebook:
– The stored name will be displayed and logged.
– The cordless handset will use the ringtone
assigned to the caller’s category.
L If the unit is connected to a PBX (Private Branch
Exchange) system, caller information may not be
received properly. Consult your PBX supplier.
L If the unit cannot receive caller information, the
following will be displayed:
“OUT OF AREA”: The caller dialled from an area
which does not provide Caller ID service.
“PRIVATE CALLER”: The caller requested not to
send caller information.
“LONG DISTANCE”: The caller made a long distance
call.
Note:
L Although Telstra and Optus do not currently send
caller name information, the caller’s name will be
displayed as stored in the directory, when a call from
that caller is received.
L The area code will need to be stored with the 8-digit
telephone number.
FC255AL-PFQX2639ZA-en.book Page 28 Friday, April 21, 2006 1:50 PM