8. Programmable Features
58
8.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 20).
1. " i N i #
2. “Time Settings” i #
3. “Alarm” i # 2 times
4. Select an alarm mode. i #
5. Enter the desired hour and minute. i #
6. Select the desired ringtone. i #
7. “Save” i # i {ih}
L When the alarm is set, e is displayed.
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm will not
sound until the call has ended.
L If you select “Once”, the setting will change to “Off”
after the alarm sounds.
8.2.3 Display Setup
Display language
1. {ih} i "
2. Select N by pressing {^}, {V}, {<}, or {>}. i #
3. Press {^} or {V} to select “Display Setup”. i
#
4. Press {^} or {V} to select “Select Language”.
i #
5. Press {^} or {V} to select the desired language. i
# i {ih}
Note:
L If you select a language you cannot read, press
{ih}, ", press {V}, press #, press {V} 2
times, press #, press {V} 3 times, press #,
select the desired language, then press #. Press
{ih}.
8.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
1. " i L i #
2. “Call Options” i #
3. “Call Restrict” i #
4. Enter “0000” (default base unit PIN).
L If you forget your PIN, contact our service
personnel.
5. To restrict the base unit, press {0}.
To restrict a cordless handset, press the desired
cordless handset number.
L All the registered cordless handset numbers will
be displayed.
L Flashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
L To turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
6. #
7. Select a memory location. i #
8. Enter the phone number or area code to be restricted
(up to 8 digits). i # i {ih}
L To erase a restricted number, press {C/T}.
“Off” Turns alarm OFF. Press # again,
then press {ih} to finish.
“Once” The alarm sounds once at the set time.
Enter the desired day and month.
“Daily” An alarm sounds daily at the set time.
FC255AL-PFQX2639ZA-en.book Page 58 Friday, April 21, 2006 1:50 PM