Filter
Top Products
8. Programmable Features
55
Setting recall/flash time
(for the base unit and
cordless handset)
{#}{7}{2} The recall/flash time depends on your telephone exchange or
host PBX.
{1} “900msec.”
{2} “700msec.”
{3} “600msec.”
{4} “400msec.”
{5} “300msec.”
{6} “250msec.”
{7} “200msec.”
{8} “160msec.”
{9} “110msec.”
{*} “100msec.” (default)
{0} “90msec.”
{#} “80msec.”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Setting the connecting
tone
{#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting
{#}{7}{7}{1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 40)
{2} “FAX ONLY”: Fax only mode (page 40)
Resetting advanced
features to their default
settings
{#}{8}{0}{0} “NO” (default)
{1} “YES”
To reset the advanced features:
1. {MENU} i {#}{8}{0}
2. Press {1} to select “YES”. i {SET} i {SET}
Note:
L The ECM selection (feature #68 on page 54) will not be reset.
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
*2 This setting can be changed individually for the base unit and the cordless handset.
– To set the cordless handset night mode, see page 24.
– To change the cordless handset LCD display contrast, see page 56.
Feature Feature code Selection
FC255AL-PFQX2639ZA-en.book Page 55 Friday, April 21, 2006 1:50 PM