Filter
Top Products
9. Multi-unit Operation
60
Note:
L To register the cordless handset to another base unit
or to the same base unit again, see (page 59).
9.2.4 Increasing the range of the base unit
You can increase the signal range of the base unit by
using a DECT repeater. Please use only Panasonic
DECT repeater. See page 9 for accessory information.
Important:
L Before registering the repeater to this base unit,
you must turn the repeater mode ON.
L Do not use more than one repeater at a time.
Setting the repeater mode
1. " i L i #
2. “Other Options” i #
3. “Repeater Mode” i #
4. “On” or “Off” i # i {ih}
Note:
L After turning repeater mode ON or OFF, w may flash
on the cordless handset momentarily. This is normal.
The cordless handset can be used once w stops
flashing.
Other Featur es
9.3 Intercom
Intercom calls can be made between a cordless handset
and the base unit, and between 2 cordless handsets.
You can page all cordless handsets at once from the
base unit.
9.3.1 Making intercom calls
With the cordless handset
1 {INT}
2 To page the base unit, press {0}.
To page another cordless handset, press the
desired cordless handset number.
L The base unit or the destination cordless
handset will beep (be paged) for 1 minute.
L To stop paging, press {ih}.
3 When the paged party answers, talk into the
cordless handset.
4 To end the intercom call, press {ih}.
With the base unit
1 {INTERCOM}
2 To page one cordless handset, press the desired
cordless handset number.
To page all cordless handsets, press {0}.
L The destination cordless handset(s) will beep
(be paged) for 1 minute.
L To stop paging, press {SP-PHONE} or
{INTERCOM}.
3 When the paged party answers, talk into {MIC}.
4 To end the intercom call, press {SP-PHONE},
{INTERCOM}.
Cordless handset locator
Using this feature, you can locate a cordless handset if it
has been misplaced.
9.3.2 Answering intercom calls
With the cordless handset
When the cordless handset is being paged, it will beep
(be paged) and the ringer indicator will flash rapidly. The
display will show the paging extension’s number.
1 Press {C}, {s} or {INT} to answer the page.
2 To end the intercom call, press {ih}.
With the base unit
When the base unit is being paged, it will beep and
display the paging extension’s number.
1 Press {SP-PHONE}, {INTERCOM} or lift the
handset to answer the page.
2 To end the intercom call, press {SP-PHONE},
{INTERCOM} or replace the handset.
9.4 Transferring a call/conference
A telephone call can be transferred between a cordless
handset and the base unit, and between 2 cordless
handsets using the intercom feature.
9.4.1 To the base unit or another cordless
handset (using the cordless handset)
1
Cordless handset:
During a phone call, press {INT}.
L The call will be put on hold.
2 Cordless handset:
To page the base unit, press {0}.
To page another cordless handset, press the
desired cordless handset number.
3 Base unit:
Press {SP-PHONE} or lift the handset to answer the
page.
Another cordless handset:
Press {C} or {s} to answer the page.
4 Cordless handset:
To complete the transfer, press {ih}.
To establish a conference call, press {3}.
9.4.2 To a cordless handset (using the
base unit)
1
Base unit:
During a phone call, press {INTERCOM}.
L The call will be put on hold.
FC255AL-PFQX2639ZA-en.book Page 60 Friday, April 21, 2006 1:50 PM