Filter
Top Products
7. Answering Machine
49
*1 If pressed within the first 5 seconds of a message,
the previous message will be played.
*2 To resume operation, press a command key within
10 seconds.
Recording a marker message
After playing back the messages, you can leave an
additional message.
1. Wait for 3 beeps indicating the end of the remote
operation.
2. Wait about 10 seconds.
3. Hear the voice guide.
4. Hear 1 beep.
5. Leave a message.
To turn ON the auto answer setting
1. Call your unit and let it ring 10 rings.
L A beep will sound.
2. Enter the remote operation ID (page 48, feature #11
on page 51) within 10 seconds.
L The receiving mode will be set to TAM/FAX or
FAX ONLY mode, depending on the setting of
feature #77 (page 55).
3. Hang up the handset.
Note:
L You cannot turn ON the auto answer setting in the
following cases:
– when the unit is set to TEL mode and during night
mode (page 24, feature #35 on page 52).
Key Remote command
{1} Repeats a message (during
playback)
*1
{2} Skips a message (during playback)
{4} Plays new messages
{5} Plays all messages
{6} Plays greeting message
{7} Records greeting message
{9} Stops current operation
*2
{0} Turns OFF auto answer setting
{*}{4} Erases a specific message (during
playback)
{*}{5} Erases all messages
{*}{6} Erases greeting message (during
greeting message playback)
{*}{#} Ends remote operation
{#} Skips the greeting message
FC255AL-PFQX2639ZA-en.book Page 49 Friday, April 21, 2006 1:50 PM