Filter
Top Products
113[For assistance, please call: 1-800-272-7033]
Operating Instructions
Functions
Headings Displayed
Connection Log
The connection, disconnection and authentication logs during PPPoE or DHCP connection are
displayed. You can check the connecting IP address in the connection log. 100 logs can be displayed
on 1 page and 400 can be recorded in total. When there are more than 100 logs, select the page
number at the bottom of the page and search for the required log.
No. This is the log number. Numbers are attributed from the most recent.
Timestamp The time when this product performed the port operation is
displayed. The time is calculated based on the PC's clock. If the time
looks incorrect, adjust your clock's settings.
Event The content of the port operation is displayed. The message
displayed is one of the following:
• [Port addition]: Port was added.
• [Port addition failure]: Port was not added.
• [Port removal]: Port was deleted.
• [Port removal (by user operation)]: Port was deleted by the user.
• [Port removal failure]: Port was not deleted.
• [All port removal (by user operation)]: All ports were deleted by
the user.
• [Auto port removal (by user operation)]: The time set in Automatic
deletion of UPnP port mapping has passed.
• [Auto port removal (by application setting)]: The time specified by
the application in use has passed.
• [Port addition failure (only permanent)]: Port was not added.
• [Port addition failure (require same port for internal/external)]:
Port was not added.
Client (IP Address, Port) The client side's IP address and port number in the specified port
information is displayed.
Protocol The protocol for the specified information is displayed. TCP or UDP
is displayed.
External Port The external (WAN side) port number in the specified port
information is displayed.
1. Click [Log] on the setup page.
2. Click [Display] Connection Log.