Panasonic BB-HGW700A Network Router User Manual


 
Operating Instructions
132
4.7 Checking the PC's IP Address and MAC Address
When this product's setup page cannot be accessed by a PC, or when data cannot not be sent/
received to/from other PCs on the network, there could be a problem with the PC's IP address settings.
Take the following steps to check the IP address settings.
4.7.1 Using Windows XP/2000
Note
The ipconfig command explanations are displayed by entering "ipconifg/?" after the command
prompt.
1. From the Start menu, select All programs,
Accessories and Command Prompt
.
When using Windows 2000, from the Start
menu, select Programs, Accessories and
Command Prompt.
2. Enter "ipconifg/all" after the command prompt
and push the [Enter] key
.
•"ipconfig/renew" refreshes all of the LAN
cards' DHCP composition parameters.
•"ipconfig/release" releases all of the LAN
cards' DHCP composition parameters.