Filter
Top Products
91[For assistance, please call: 1-800-272-7033]
Operating Instructions
Functions
Security Policy Database Registration
Up to 10 security policy database entries can be made.
Data Entry Field
IPsec (IPv4) Connection Example
Database Name Enter a database name up to 10 alphanumeric characters.
Entry Selecting Enable, enables the entered IPsec settings. When you do
not want to use IPsec select Disable. Even if Disable is selected the
entered settings will not be deleted.
Pre-shared Key Sets the pre-shared key. Enter between 8 and 64 alphanumeric
characters. The secret shared key used in IPsec is created based on
the pre-shared key, so do not let third parties know your pre-shared
key. This is in order to maintain communication security.
IPv4 Settings
Destination IPv4 WAN
address
Sets the other party's WAN IPv4 address.
Destination LAN
network
Set the destination's LAN network prefix and prefix length. Make
sure that this product's LAN side network is a different network from
the destination's LAN side network.
Options Setup Sets detailed IPsec-related settings. (see page 94)
IPv6 Settings
Destination IPv6 WAN
address
Sets the other party's WAN IPv6 global address.
Destination LAN
network
Set the other party's LAN network prefix and prefix length. Set a
global prefix for the prefix. Also, make sure that this product's LAN
side network is a different network from the destination's LAN side
network. Please note that a link local address cannot be set.
Options Setup Sets detailed IPsec-related settings. (see page 96)
Own LAN Network
192.168.0.0/24
Destination LAN Network
192.168.1.0/24
Destination IPv4 WAN address
10.0.0.1
[IPv4 Settings]
Enter "10.0.0.1" for the Destination IPv4 WAN address.
Enter "192.168.1.0", prefix length "24" for the Destination LAN network.