Filter
Top Products
Operating Instructions
42
3.1.6 Registering a Camera Automatically
After connecting this product to a Panasonic Network Camera (Customer-provided), turning the
camera on, and returning the settings to factory default, the camera's network setup (IP address and
subnet mask etc.) and wireless security setup are performed automatically. After the camera is turned
on, this product and the camera exchange information and automatically set up the network. Then, the
camera image is registered on the Camera Portal.
Setup Headings
Connecting the Camera without Using Automatic Setup
• When registering all cameras manually, see Additional Camera Registration. (see page 44)
This Product Port Forwarding
Camera Registration
Screen Assignment
Camera Port Number (IPv4)
IP Address (IPv4)
Port Number (IPv6)
DNS Server Address (IPv4/IPv6)
Subnet Mask
Default Gateway (IPv4)
SSID (wireless LAN type only)
Encryption Key (wireless LAN type only)
Compatible cameras
(Customer-provided) :
(as of Mar. 2005)
Indoor type
KX-HCM8
KX-HCM10
KX-HCM250
KX-HCM280
BB-HCM311A
BL-C10A
BL-C30A
BB-HCM381A
Outdoor type
KX-HCM230
KX-HCM270
BB-HCM331A
BB-HCM371A