Filter
Top Products
2. Preparation
29
For assistance, please visit http://www.panasonic.com/consumersupport
The handset will ring at the low level for
intercom calls if both lines are turned OFF.
L To turn the ringer back ON, press {1}, {2} or
{3} in step 3.
To turn the ringer OFF temporarily
While the handset is ringing for an outside call,
you can turn the ringer OFF temporarily by
pressing {OFF}. The handset will ring the next
time a call is received on that line.
Ringer tone
L You can select the handset ringer tone from
one of 8 patterns for outside calls (feature
121 and 122 on page 88).
Handset receiver volume
While using {TALK} or {HOLD/INTERCOM},
press {v} or {e}.
Speaker volume
While using {SP-PHONE}, press {v} or {e}.
2.10 Adjusting base unit
volume
Ringer volume
You can set the base unit ringer volume for each
line.
1. Press {LINE SELECT} repeatedly until
“LINE 1” or “LINE 2” is announced.
L “LINE1” or “LINE2” will be displayed.
L Do not select “LINE1&LINE2”. You
cannot set the ringer for both lines at the
same time.
2. Press {A} or {B} repeatedly to select the
desired volume.
L To change the ringer tone, press {<} or
{>} repeatedly.
L To stop ringing, press {STOP}.
Note:
L For outside calls, the base unit will ring at the
level selected for the line.
For intercom calls, the base unit will ring at
the higher level of the 2 lines.
L You can also adjust the base unit volume
using the handset (feature 0*61 and 0*62
on page 90).
To turn the ringer OFF
Press {B} repeatedly to display “RINGER OFF=
OK?” in step 2, then press {SET}.
L The base unit will display “RINGER OFF”
and the line number while not in use.
L The base unit will not ring for outside calls
received on the selected line.
The base unit will ring at the low level for
intercom calls if both lines are turned OFF.
L To turn the ringer back ON, press {A} in step
2.
{SET}
{A}{B}
{LINE SELECT}
{<}{>}
{STOP}
FG6550-PFQX2225ZA-en.book Page 29 Monday, August 8, 2005 8:16 PM