Filter
Top Products
8. Programmable Features
90
{0}{6}{4} Changing the recording sound
quality
{1} “Standard” (default): Recording sound
quality is standard, and the maximum recording
time is approximately 60 minutes.
{2} “Enhanced”: Recording sound quality is
clearer, and the maximum recording time is
approximately 30 minutes.
Note:
L You can also program this feature with the
base unit (feature #53 on page 82).
{0}{8} Changing the display language
You can select either “English” (default) or
“Español” for the display language.
{1} “English” (default)
{2} “Español”
{0}{9} Room monitor (Handset)
{1} “On”
{0} “Off” (default)
See page 53 for details.
{0}{#} Setting the message alert
You can select whether or not the
Ringer/Message alert indicator on the handset
will flash when new messages have been
recorded (page 70).
{1} “On”: The Ringer/Message alert indicator
will flash.
{0} “Off” (default): Deactivates this feature.
Note:
L The Ringer/Message alert indicator will not
flash for new messages while the handset is
in use.
L The Ringer/Message alert indicator acts as a
ringer indicator and as a message alert
indicator. This indicator will flash rapidly
when a call is received whether this feature is
ON or OFF.
L Battery life may be shortened when using this
feature (page 23).
LINE 1:{0}{*}{1}{1} LINE 2:{0}{*}{1}{2}
Setting ringer tone for outside calls (Base
unit)
You can select the base unit ringer tone from one
of 8 patterns for outside calls.
{1} “Tone 1” (default for LINE 1)
{2} “Tone 2” (default for LINE 2)
{3} “Tone 3”
{4} “Tone 4”
{5} “Melody 1”
{6} “Melody 2”
{7} “Melody 3”
{8} “Melody 4”
Note:
L When selecting the ringer tone, the base unit
will ring. If the base unit ringer volume has
been turned OFF (page 29), the base unit will
not ring.
L You can also program this feature with the
base unit (feature #17* and feature #17# on
page 79).
{0}{*}{2} Setting the incoming call tone
(Base unit)
This tone lets you know when a call is being
received on the other line, during a conversation
on the base unit.
{1} “On”: The tone will sound for as long as the
line rings.
{2} “2” (default): The tone will sound 2 times.
{0} “Off”: Deactivates this feature.
Note:
L You can also program this feature with the
base unit (feature #73 on page 83).
{0}{*}{3} Room monitor (Base unit)
{1} “On”
{0} “Off” (default)
See page 53 for details.
Note:
L You can also program this feature with the
base unit (feature #74 on page 83).
{0}{*}{5} Selecting the line for telephone
calls (Base unit)
To determine which line is selected when you
press {SP-PHONE} for telephone calls.
{1} “Line1”: LINE1 will be selected.
{2} “Line2”: LINE2 will be selected.
{0} “Auto” (default): When making a call, LINE
1 will be selected. If that line is unavailable, LINE
2 will be selected. When answering a call, the
ringing line will be selected. When you call back
using caller information (page 46), the indicated
line will be selected.
Note:
L You can select a line manually regardless of
this setting by pressing {LINE1} or {LINE2}.
L You can also program this feature with the
base unit (feature #37 on page 81).
LINE 1:{0}{*}{6}{1} LINE 2:{0}{*}{6}{2}
Changing the ringer volume (Base unit)
{1} Low
{2} Medium (default)
FG6550-PFQX2225ZA-en.book Page 90 Monday, August 8, 2005 8:16 PM