Filter
Top Products
8. Programmable Features
80
been turned OFF (page 29), the base unit will
not ring.
L You can also program this feature with the
handset (feature 0*11 and feature 0*12 on
page 90).
8.4 Advanced features
{#}{2}{2} Setting the journal report to print
automatically
{1} “ON” (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 55).
{2} “OFF”: The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{#}{2}{3} Sending documents overseas
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
{1} “NEXT FAX”: This setting is effective only for
the next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
{2} “OFF”: Deactivates this feature.
{3} “ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
Note:
L This feature is not available for broadcast
transmission.
L Calling charges may be higher than usual.
{#}{2}{5} Sending a fax at a specific time
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
{1} “ON”
{2} “OFF” (default)
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 54).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {1} to select “ON”.
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “AM” or
“PM”.
10.Press {SET}.
FG6550-PFQX2225ZA-en.book Page 80 Monday, August 8, 2005 8:16 PM