Filter
Top Products
8. Programmable Features
88
8.7 Programming features
LINE 1:{1}{1}{1} LINE 2:{1}{1}{2}
Changing the ringer volume (Handset)
{1} Low
{2} Medium
{3} High (default)
{0} Off
See page 28 for details.
LINE 1:{1}{2}{1} LINE 2:{1}{2}{2}
Setting ringer tone for outside calls
(Handset)
You can select the handset ringer tone for each
line from one of 8 patterns for outside calls.
{1} “Tone 1” (default for LINE 1)
{2} “Tone 2” (default for LINE 2)
{3} “Tone 3”
{4} “Tone 4”
{5} “Melody 1”
{6} “Melody 2”
{7} “Melody 3”
{8} “Melody 4”
Note:
L If LINE 1 and LINE 2 have different ringer
patterns and both lines receive calls
simultaneously, both ringers will ring
alternately.
L To change the ringer volume, press
{VOLUME} (soft key), then go to step 3 on
page 28.
{1}{3} Setting the incoming call tone
(Handset)
This tone lets you know when a call is being
received on the other line, during a conversation
on the handset.
{1} “On”: The tone will sound for as long as the
line rings.
{2} “2” (default): The tone will sound 2 times.
{0} “Off”: Deactivates this feature.
{2} Playing back messages
See page 70.
{4} Setting the date and time
Go to step 3 on page 31.
L You can also program this feature with the
base unit (feature #01 on page 79).
{5} Setting voice enhancer feature
{1} “On”
{0} “Off” (default)
See page 35 for details.
{#}{1} Copying 1 phonebook item
Go to step 3 on page 42.
{#}{2} Copying all phonebook items
Go to step 3 on page 43.
{0}{1} Changing the handset LCD display
contrast
You can adjust the handset display contrast.
{1} Level 1
{2} Level 2
{3} Level 3 (default)
{4} Level 4
{5} Level 5
{6} Level 6
Note:
L To change the base unit display contrast, see
feature #39 on page 82.
{0}{2} Setting the key tone
You can select whether or not key tones are
heard when keys are pressed. Includes
confirmation tones and error tones.
{1} “On” (default): You will hear key tones.
{0} “Off”: Deactivates this features.
{0}{3} Setting auto talk feature
This feature allows you to answer a call by simply
lifting the handset off the charger.
{1} “On”
{0} “Off” (default)
Note:
L If you subscribe to Caller ID service and want
to view the caller’s information on the
handset display after lifting up the handset to
answer a call, turn OFF this feature.
L If you change the line selection feature from
“Auto” to “Line1” or “Line2” (feature 055
on page 89), the auto talk feature will function
for that line only. If the other line receives a
call, the auto talk feature will not function.
{0}{4} Setting the Caller ID number auto
edit feature
{1} “On” (default)
{0} “Off”
See page 47 for details.
{0}{5}{1} Setting dialing mode
If you cannot make calls, change this setting
depending on your telephone line service.
{1}“Pulse”: For rotary pulse dial service.
FG6550-PFQX2225ZA-en.book Page 88 Monday, August 8, 2005 8:16 PM