Filter
Top Products
4. Fax
59
How to receive faxes with an extension
telephone
If you have another telephone connected to the
same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation
code) firmly.
L The fax machine will start reception.
3. Replace the handset.
Note:
L To receive fax documents using the
extension telephone, make sure remote fax
activation is turned ON (feature #41 on page
82) beforehand. The default setting is ON.
4.6 Receiving a fax
automatically – Auto
answer ON
4.6.1 Activating TAM/FAX mode
(Telephone Answering
Machine/Fax mode)
You can activate TAM/FAX mode for each line or
for both lines.
1 Make sure feature #77* for LINE 1 or
feature #77# for LINE 2 is set to “TAM/FAX”
(page 83) beforehand.
2 Press {AUTO ANSWER} repeatedly to
display “ON”.
Example: LINE 1 is ON
Example: LINE 2 is ON
L The unit announces “Answer set”, the set
line and the current day and time.
L The unit will announce the remaining
recording time if it is less than 10 minutes.
L If “GREETING ONLY” is displayed, the
unit will not record any incoming
messages (feature #10* and feature
#10# on page 79, or feature 0621 and
0622 on page 89).
LINE 1
ON OFF
TAM/FAX LINE1
LINE 2
LINE 1
OFF ON
TAM/FAX LINE2
LINE 2
FG6550-PFQX2225ZA-en.book Page 59 Monday, August 8, 2005 8:16 PM