125
Specifications
General
Information
Technical data about this product!
Applicable Lines: Public Switched Telephone Network
Document Size: Max. 216 mm (8
1
⁄2q) in width
Max. 600 mm (23
5
⁄8q) in length
Effective Scanning Width: 208 mm (8
3
⁄16q)
Recording Paper Size: Letter:216 mm a 279 mm (8
1
⁄2qa11q)
Legal: 216 mm a 356 mm (8
1
⁄2qa14q)
Effective Printing Width: 208 mm (8
3
⁄16q)
Transmission Time*: Approx. 15 s/page (Original mode)**
Scanning Density: Horizontal: 8 pels/mm (203 pels/inch)
Vertical: 3.85 lines/mm (98 lines/inch) —STANDARD mode
7.7 lines/mm (196 lines/inch) —FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch) —SUPER FINE mode
Halftone Level: 64-level
Scanner Type: Contact Image Sensor (CIS)
Printer Type: Thermal Printing
Data Compression System: Modified Huffman (MH), Modified READ (MR)
Modem Speed: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment: 5°C – 35°C (41°F – 95°F), 20% – 80% RH (Relative Humidity)
Dimensions (H t W t D): 143 mm a 325 mm a 305 mm (5
5
⁄8qa12
13
⁄16qa12q)
Mass (Weight): Approx. 4.0 kg (8.8 lb.)
Power Consumption: Standby: Approx. 4.0 W
Transmission: Approx. 18 W
Reception: Approx. 39 W (When receiving a 20% black document)
Copy: Approx. 48 W (When copying a 20% black document)
Maximum: Approx. 160 W (When copying a 100% black document)
Power Supply: 120 V AC, 60 Hz (This unit will not function at 50 Hz.)
Memory Capacity: Approx. 28 pages of memory reception
Approx. 25 pages of memory transmission
(Based on the CCITT of No. 1 Test Chart in standard resolution.)
** Transmission speed depends upon the contents of the pages,
resolution, telephone line conditions and capability of the
receiving unit.
** The 15 second speed is based upon the CCITT No. 1 Test
Chart and original mode.
If the capability of the other party’s machine is inferior to your
unit, the transmission time may be longer.
CCITT No. 1 Test Chart
Note:
≥Any details given in these instructions are subject to change without
notice.
≥The pictures and illustrations in these instructions may vary slightly
from the actual product.