Filter
Top Products
64
Receiving Faxes
TEL mode!
(answering all calls manually)
Note:
≥If you do not answer the call within 15 rings, the unit
will temporarily switch to the fax and the caller can
send document.
If the AUTO ANSWER light is on, turn it off by pressing
(AUTO\ANSWER).
≥The display will show the following.
Display:
TEL MODE
1
When the unit rings, lift the handset to answer the
call.
2
When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press (START/SET/COPY).
3
Replace the handset.
≥The unit will start reception.
CONNECTING.....
OFF
FAX ON
AUTO ANSWER
START/SET/COPY
STOP
Handset
To stop receiving the document
Press (STOP).
Friendly reception feature
When you answer a call and hear a fax calling tone
(slow beep), the unit will automatically start
receiving.
≥If this feature is not required, set to “OFF” (p. 79).
Memory reception
When a printing problem is detected, the unit will
temporarily store the received document into
memory.
While the document is in memory, the unit will:
—display an error message and the following
message alternately.
Display:
—alert you with slow beeps (memory reception
alert).
≥Follow the instructions on pages 101 and 102 to
solve the problem and print the stored document.
≥For memory capacity, see page 125.
FAX IN MEMORY