Filter
Top Products
49
Fax/Copy
Sending Faxes
Sending a fax using the JOG DIAL directory!
Before using this feature, program the desired names and fax numbers into the directory (p. 36).
1
Open the document feeder tray.
2
Adjust the width of the document guides to the size
of the document.
3
Insert the document (up to 15 pages) FACE
DOWN until a single beep is heard and the unit
grabs the document.
Display:
4
If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 47).
5
Rotate (JOG\DIAL) until the desired name is
displayed.
Example:
≥To confirm the number, press (NAME/TEL\NO.).
6
Press (START/SET/COPY).
≥The unit will start transmission.
CONNECTING.....
FAX=<Alice>
Alice
STANDARD
FACE DOWN
Document
feeder tray
Document guides
STOP
START/SET/COPY
MONITOR
JOG DIAL
NAME/TEL NO.
RESOLUTION
Helpful hints:
≥You can confirm the stored items on the display (p. 38)
or on the telephone number list (p. 119).
≥The connecting tone will be heard during dialing to tell
you the status of the other party’s machine (p. 61).
Note:
≥If the desired name has not been stored, press (STOP)
and dial the number manually.
≥For further details about using the JOG DIAL, see
page 38.
If your unit does not send a fax
Verify that the number dialed is answered by the
other party’s machine.
1. Rotate (JOG\DIAL) until the desired name is
displayed.
2. Press (MONITOR).