Panasonic KX-FM106 All in One Printer User Manual


 
34
One-Touch Dial
To keep the telephone number
secret
Press (SECRET) (One-Touch Dial key 3) after
entering the telephone number in step 5.
A secret number can not be viewed after this
is set.
The telephone number will not appear on the
telephone number list.
Pressing (SECRET) does not count as a
digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 37.
1
23
4
56
7
89
0
START/SET/COPY
One-Touch
Dial keys
DIRECTORY PROGRAM
HYPHEN
SECRET
LOWER
Helpful hint:
You can confirm the stored items on the
display (p. 38) or on the telephone number
list (p. 119).
1
Press (DIRECTORY\PROGRAM).
Display:
2
For stations 1–3
Press one of the One-Touch Dial keys.
Press (START/SET/COPY)
to go to the next prompt.
For stations 4–6
Press (LOWER), then press one of the One-Touch
Dial keys.
3
Enter the station name, up to 10 characters,
following the instructions on page 27.
Example:
4
Press (START/SET/COPY).
Example:
5
Enter the telephone number up to 30 digits.
To enter a hyphen in a telephone number, press
(HYPHEN) (One-Touch Dial key 1).
Example:
6
Press (START/SET/COPY).
To program other stations, repeat steps 2 to 6.
7
Press (DIRECTORY\PROGRAM) to exit the
program.
Note:
If “DIAL MODE” is not displayed when you select
stations 1, 2 or 3 in step 2, the broadcast function has
been set. To use the station as a One-Touch Dial key,
press to select “DIAL MODE”. The broadcast
function will be canceled.
A hyphen entered in a telephone number counts as two
digits.
OR USE JOG-DIAL
PRESS STATION
REGISTERED
<S02>=111-4497
<S02>=
NAME=John
DIAL MODE
▼▲
OR USE JOG-DIAL
PRESS STATION
Storing names and telephone numbers in the One-Touch Dia
l
!
The unit’s memory allows you to use the One-Touch Dial for rapid access to your most frequently dialed
numbers. 6 stations are available.
One-Touch Dial keys 1, 2 or 3 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys
(BROADCAST). These functions cannot be used at the same time. For the broadcast function, see pages
58 to 60.