Filter
Top Products
9128-A2-GB20-80 September 2002
xi
About This Guide
Purpose and Intended Audience
This document contains information needed to properly set up, configure, and
verify operation of the FrameSaver SLV (Service Level Verifier) 9126, 9126-II, and
9128-II CSU/DSU, and 9126-II Router running firmware release 2.0.3 or above. It
is intended for system designers, engineers, administrators, and operators.
You must be familiar with the functional operation of digital data communications
equipment and frame relay networks.
Document Organization
Section Description
Chapter 1,
About the FrameSaver
SLV
Identifies how the FrameSaver SLV 9126, 9126-II,
and 9128-II CSU/DSU, and 9126-II Router, fit into
Paradyne’s Service Level Management (SLM)
solution, and describes their features.
Chapter 2,
User Interface and
Basic Operation
Shows how to navigate the menu-driven user
interface.
Chapter 3,
Configuration
Procedures
Shows how to access and save configuration options.
Chapter 4,
Configuration Options
Provides configuration information for the
FrameSaver SLV 9126, 9126-II, and 9128-II
CSU/DSU, and 9126-II Router.
Chapter 5,
Configuring the
FrameSaver SLV Router
Describes the router’s interfaces and features, and
shows typical setups and configurations.
Chapter 6,
Security and Logins
Provides procedures for controlling access to the
FrameSaver SLV and setting up logins.
Chapter 7,
Operation and
Maintenance
Provides procedures to display unit identification
information and perform file transfers, as well as how
to display and interpret status and statistical
information.
Chapter 8,
Troubleshooting
Provides device problem resolution, alarm, and other
information, as well as troubleshooting and test
procedures.