Filter
Top Products
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80 September 2002
B-17
Trap: dialControl
These traps indicate when an ISDN backup call is initiated or terminated, or when
an outgoing call is rejected by the far end device.
Table B-9. dialControl Traps (1 of 2)
Trap Variable-Bindings Possible Cause
Standard Dial Control MIB
dialCtlPeerCall-
Information
callHistoryPeerId
(RFC 2128)
callHistoryPeerIfIndex
(RFC 2128)
callHistoryLogicalIfIndex
(RFC 2128)
ifOperStatus (RFC 1573)
callHistoryPeerAddress
(RFC 2128)
callHistorySubAddress
(RFC 2128)
callHistoryDisconnect-
Cause (RFC 2128)
callHistoryConnectTime
(RFC 2128)
callHistoryDisconnect-
Time (RFC 2128)
callHistoryInfoType
(RFC 2128)
callHistoryCallOrigin
(RFC 2128)
A peer-to-peer call has been
ended.
String:
‘Call sequence on $ifString
[using
B-Chnl $channel]
terminated due
to $causeString.’
The B-channel in this example is
only provided if it is known.
See Most Recent and Previous
Cause Values,Table 7-13, DBM
Interface Status, in Chapter 7,
Operation and Maintenance
, for a
list of the $causeStrings and their
cause numbers.
dialCtlPeerCall-
Setup
callActivePeerId
(RFC 2128)
callActivePeerIfIndex
(RFC 2128)
callActiveLogicalIfIndex
(RFC 2128)
ifOperStatus (RFC 1573)
callActivePeerAddress
(RFC 2128)
callActiveSubAddress
(RFC 2128)
callActiveInfoType
(RFC 2128)
callActiveCallOrigin
(RFC 2128)
A peer-to-peer call has been sent
or received.
String:
‘Call sequence on $ifString
[using
B-Chnl $channel]
initiated
[remotely/locally]
.’
The B-channel in this example is
only provided if it is known.