Filter
Top Products
10. Setting Up NetScout Manager Plus for FrameSaver Devices
10-12
September 2002 9128-A2-GB20-80
4. Click on the ... button to the right of indicated fields for a drop-down list from
which selections can be made. Minimally, configure the following fields:
5. Select the OK button (at the bottom of the screen) to add this alarm.
6. Repeat Step 3 through Step 5 until all traps are configured for all DLCIs.
Refer to
Configuring Alarms in
the
NetScout Manager/Plus & NetScout Server
Administrator Guide
for additional information.
Field Select or Enter . . .
Domain User Defined
DLCI DLCI number for trap being assigned
Stats Type PARADYNE
Trap Variable Trap variable to be configured
Key1 The ifIndex for the frame relay logical interface is 1
Key2 DLCI number (same as DLCI above)
Type Absolute or Delta radio button*
Rising, Falling, or Both radio button**
Threshold Value that will trigger a trap.
* Latency MIB variables should be Absolute; all others should be Delta.
** Generally, Rising is selected.