Filter
Top Products
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80 September 2002
B-3
System Group (mib-2)
This section provides the system object identifier and system description for the
System Group for the FrameSaver unit, which is an SNMPv1 MIB.
FrameSaver Unit’s sysDescr (system 1)
The following is the system description (sysDescr [system 1]) for the NMS
subsystem in the FrameSaver unit:
PARADYNE T1 FrameSaver SLV; Model:
[9126/9126-II/9126-IIR/9128-II]
; S/W
Release:
(MM.mm.bb [Major.minor.build] format)
; NAM CCA number:
(hardware version in hhhh-hhh format)
; Serial number:
sssssss
FrameSaver Unit’s sysObjectID (system 2)
The following is the system object identifier (sysObjectID [system 2]), or OID, for
the NMS subsystem in the FrameSaver units:
FrameSaver SLV 9126-SLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7
FrameSaver SLV 9126-II: 1.3.6.1.4.1.1795.1.14.2.4.4.7.1
FrameSaver SLV 9126-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7
FrameSaver SLV 9126-IIR: 1.3.6.1.4.1.1795.1.14.2.4.11.4.1
FrameSaver SLV 9126-IIRSLV: 1.3.6.1.4.1.1795.1.14.2.4.11.4
FrameSaver SLV 9128-II: 1.3.6.1.4.1.1795.1.14.2.4.4.8.1
FrameSaver SLV 9128-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.8
Interfaces Group (mib-2)
Clarification for objects in the Interfaces Group, as defined in RFC 1573 and
RFC 1213, which is an SNMPv1 MIB, is provided in this section.
Paradyne Indexes to the Interface Table (ifTable)
The following table provides the ifName for each interface type, the ifDescr, and
the ifIndex that Paradyne has assigned to each.
Table B-1. Paradyne Interface Objects Information (1 of 3)
ifName Description ifDescr (ifEntry 2) ifIndex
Physical Layer
Network T1 T1 network interface Network T1; T1 FR NAM;
Hardware Version:
hhhh-hhh
101001001
DSX-1 T1 DSX-1 interface DSX-1 T1; T1 FR NAM;
Hardware Version:
hhhh-hhh
101002001
Sync Data Port
S01P1
Synchronous Data
Port-1
Synchronous Data Port, Slot: 1,
Port: 1; T1 FR NAM; Hardware
Version:
hhhh-hhh
101003001