Filter
Top Products
If you have printed labels since turning the printer on, you will
see
Len Min Max OK
0290 036 188 Y
• The first listing, Len, is the length of the supply in dots.
• The Min and Max listings measure reflectivity of the
sensor mark on the supply. The Min listing typically
reads below 50, and the Max listing typically reads
between 150 and 255. Under normal conditions, these
listings should not fluctuate more than 20 units between
readings.
• The OK listing tells whether the sensor mark on the
supply passed a detection test.
Press to see other readings. The printer stores readings
on the last 16 tags or labels printed.
9401/9402 System Administrator’s Guide
13-8