Filter
Top Products
3. What system are you using to measure supplies and
fields? You have three choices.
E English. Measure in 1/100 inches.
M Metric. Measure in 1/10 millimeters.
G Graphic. Measure in dots. 192 dots = 1 inch.
Write E, M, or G in box F5.
All field dimensions in the format must follow the system
selected here.
4. Tear off one label or tag from your
supply roll. Position it in the
lower-left corner of the grid.
Make sure the bottom left
corner of the supply aligns
with the lower left corner of the
grid. (The bottom is the edge that
exits the printer first.)
5. Measure the
length
of the supply
from bottom to top, using the ruler
marks on the left side of the grid.
When measuring aperture and black mark supplies,
measure from top to top as shown below.
When measuring labels, use the black sensor marks on
the label backing.
Supply
Length
Supply
Length
Designing a Format
2. Designing a Format
2-11