Filter
Top Products
66 C1528M-F (6/05)
SELECT CAMERAS
If you select a restricted camera view, the camera view does not appear on that monitor. The previously selected, unrestricted camera view
remains on the monitor.
CONTROL RECEIVERS
Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera but
cannot control the camera.
Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require programming
changes. Refer to the Programming section.
Receiver control is not available with the KBD100 keyboard.
KBD200A KEYBOARD
KBD300A KEYBOARD
KBD960/KBR960 KEYBOARDS
KBD100/200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS
1. Enter the camera number.
2. Press the CAM key.
OR
Press the BWD or FWD key to scroll through the available cameras.
1. Enter the camera number.
2. Press the CAM key.
OR
Press the PREV or NEXT key to scroll through the available cameras.
OR
From the Camera Menu, select or to scroll through the
available cameras.
Pan/Tilt/Zoom Lens Control: Focus, Iris
Press and hold the appropriate pan/tilt key until the camera reaches
the desired position. To change the speed of movement, press a
number (1-9) key first (1=slowest, 9=fastest). Press and hold the
appropriate zoom key until the desired effect is seen.
Press and hold the appropriate lens control key until the desired
effect is seen.
Pan/Tilt/Zoom Lens Control: Focus, Iris
Move the joystick until the camera reaches the desired position. To
increase the speed of movement, move the joystick farther from
center.
Twist the joystick clockwise to zoom in, counterclockwise to zoom
out.
Press and hold the appropriate lens control key until the desired
effect is seen.
Pan/Tilt/Zoom Lens Control: Focus, Iris
Move the joystick until the camera reaches the desired position. To
increase the speed of movement, move the joystick farther from
center or press the T key to pan at turbo speed.
Twist the joystick clockwise to zoom in, counterclockwise to zoom
out. Or use the IN/OUT key to zoom in or out.
Use the NEAR/FAR key to focus near or far.
Use the OPEN/CLS key to open or close the iris.