Filter
Top Products
C1528M-F (6/05) 81
Satellite Port Settings
Change the device setting to SATELLITE for Port 7. The REPORT ALARMS setting changes to ON by default. If you do not want to report alarms to
the CM9740/CM9760 system, change this field to OFF (refer to the Satellite Alarms section for information on reporting alarms).
NOTE: You must also configure the appropriate CM9760-CC1 port with a baud rate of 9600 and odd parity.
Figure 55. Change the Port Setting
PELCO SWITCHER
MODEL CM6800E
MAIN MENU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAMERA
LOGICAL CAMERA
MONITOR
ACCESS
TIME & DATE
PORT
PRIORITY
SEQUENCE
MACRO
ALARM CONTACTS
EVENT TIMER
SET AUXILIARY
SET PASSWORD
SYSTEM
ABOUT CM6800E
ENGLISH
RETURN
SET SERIAL PORT 07
DEVICE:
TYPE:
BAUD RATE:
PARITY:
DATA BITS:
STOP BITS:
REPORT ALARMS:
SATELLITE
RS485
9600
ODD
8
1
ON
RETURN