Filter
Top Products
70 C1528M-F (6/05)
CREATE AND RUN A PATTERN
Patterns are not available with the KBD100 keyboard.
KBD200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS
Create a Long Pattern Refer to the KBD960 Keyboard Installation/Operation manual for
instructions on creating a pattern.
1. Select to display the Preset Menu.
2. Select to start a pattern.
OR
1. Select to display the Preset Menu.
2. Enter 1.
3. Select to run the first pattern of previously defined
half-patterns.
OR
1. Select to display the Preset Menu.
2. Enter 2.
3. Select to run the second pattern of previously defined
half-patterns.
1. Enter a camera number.
2. Enter 0.
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Create a Short Patter
1. Enter a camera number.
2. Enter the short pattern number (1 or 2).
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Run a Long Pattern
1. Press the PATTERN key.
2. Move the joystick or call a preset to stop the pattern.
Run a Short Patter
1. Enter the short pattern number (1 or 2).
2. Press the PATTERN key.
3. Move the joystick or call a preset to stop the pattern.
PRST
PRST
PRST