Filter
Top Products
C1528M-F (6/05) 83
CONFIGURE CM9700-MGR SYSTEM MANAGER SETTINGS
Instructions for configuring the CM6800-E-48X8 as a satellite device with the CM9700-MGR System Manager software are provided here. If you
are using the CM9760-MGR System Manager software, refer to the Configure CM9760-MGR System Manager Settings section.
To add a satellite device to a 9700 system, you simply need to add the satellite device in the CM9700-MGR. The Add Device wizard helps you
configure all the settings that are needed to set up the device for satellite operation. Detailed instructions for adding a satellite device in the
CM9700-MGR are provided in the CM9700-MGR Software Guide.
Note that you cannot program camera titles for satellite cameras through the 9700 System Manager. You can program these camera titles
directly from the satellite device. When a 9700 System monitor displays a satellite camera, the title received from the satellite device is
displayed.
Figure 58. Add a Satellite Device in the CM9700-MGR
Once the CM9700-MGR system configuration file programming is complete, you must transfer the configuration files (the “flat files”) to the
CM9700-CC1. Refer to the CM9700-MGR Software Guide for instructions.