Filter
Top Products
34
SD Memory Card
CAUTION
z Do not remove or insert the SD Memory Card until Windows has completed loading.
z Do not remove the card or turn off the computer in the following cases, otherwise the data may be corrupted.
• While the computer is in standby or hibernation.
• While the SD Memory Card indicator is on.
• While data is being read from or written to the card.
• Immediately after the writing operation.
The computer may still continue the access to the card just after writing operation. If you remove the card before the
operation is completed, the data may be damaged or the card access may no longer be performed normally.
z Note that Panasonic assumes absolutely no liability for any loss of data recorded by the user, or any other damages,
direct or indirect.
z Do not forcibly draw out the card, otherwise the slot may be damaged.
z Insert the card in the correct direction, otherwise the card and the slot may be damaged.
z After resuming from standby or hibernation, do not access the SD Memory Card for approximately 30 seconds.
To insert the card
1 Open the cover.
A Slide the latch down to unlock the cover.
B Open the cover.
2 Insert the SD Memory Card with the label side facing up and
with the cut corner facing in.
z It may take 0.5 to 1 minute for the computer to recognize the SD Memory
Card which is inserted for the first time to this computer.
Inserting/Removing the SD Memory Card