Philips CF-U1 Personal Computer User Manual


 
72
Error Code / Message
Follow the instructions below when an error message or code appears. If the problem persists or if the error code/message is
not shown here, contact Panasonic Technical Support.
Error Code/Message Solution
Bad System CMOS An error has occurred in the memory of system settings. This occurs when the memory con-
tent is changed by an unexpected program operation, etc.
z Start the Setup Utility and return the settings to the default values, and then change the
settings as necessary.
z If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support.
System CMOS Checksum
Error
Invalid Year. System date
restored to 01/01/2008
The date and time settings are not correct.
z Start the Setup Utility and set the correct date and time.
z If the problem persists, the internal clock battery may need to be replaced. Contact Pana-
sonic Technical Support.
Press <F2> to enter setup
z Write down the error details and press
Fn
+
U
(F2) or
Fn
+ (Del) to start the Setup
Utility.
Change the settings if necessary. (Î page 59)