Filter
Top Products
Polycom® RSS™ 4000 User Guide
4-15
3 On the Add Local Group page that appears, specify a name for the group
to be created. The group name must be unique. You can enter associated
descriptions if necessary.
4 Click the Group Members tab to add group members.
The list at the top of the page displays all the users defined in the current
system. Select users to add to the group, and then click the Add Button.
Added users appear in the group member list, and are identified by the
icon in the user list.
― You can delete an item either by double-clicking that item in the
group member list, or by clicking that item and then clicking the
Remove button.
― Adding multiple users at a time by using the standard Windows
keyboard operations is supported.
Managing Groups
To modify or delete an existing group:
1 Click User>Groups in the menu bar at the top of the page.
2 Select the group entry to be deleted in the group list.
3 In the ACTIONS area on the left side of the page, click Edit or Delete to
modify or delete the group.
Service Setting
Active Directory
Polycom® RSS™ 4000 supports integration with an Active Directory server.
After integration, users in the Active Directory domain can access the Web
Management pages of the Polycom® RSS™ 4000 directly as ordinary users
without needing to be registered in the Polycom® RSS™ 4000.
To configure an Active Directory server:
1 Click System Config>Service Setting>Active Directory in the menu bar
at the top of the page.
2 Configure the following parameters on the Active Directory page:
Table 4-12 Active Directory Parameters Description
Parameter Description
Integrate with Active
Directory Server
Defines whether to integrate the Polycom® RSS™ 4000
with an Active Directory server. Once this option is
enabled, you can configure specific parameters.
Active Directory Server
Sets the IP address or domain name of the Active
Directory server to be integrated.
Note:
If you set a domain name, make sure you have
already set a DNS server address that can resolve this
domain name in
System Config>IP Setting
.
User ID
Sets the user name that will be used by the Polycom®
RSS™ 4000 to access resources on the Active Directory
server.