Filter
Top Products
Polycom® RSS™ 4000 User Guide
6-5
“set {lan1 | lan2} speed {auto | 1000 | 100 full | 100 half | 10 full | 10 half}”
- set the connection features for the LAN 1 or LAN2 interface.
Table 6-3 Network Setting Parameters – LAN Interface IP Address
Parameter Description
dhcp
Automatically gets the address information through the DHCP
server.
static
Specifies the static IP address information -
Ip: IP address of the network port
mask: subnet mask of the network port
gateway: gateway address of the network port
Table 6-4 Network Setting Parameters – LAN Interface Connection Rate
Parameter Description
auto Auto negotiation mode
1000 1000Mbps
100 full 100Mbps full duplex
100 half 100Mbps half duplex
10 full 10Mbps full duplex
10 half 10Mbps half duplex
[Example 1] Set the IP address of the LAN1 interface to 172.21.103.29, subnet
mask to 255.255.255.0, and the gateway address to 172.21.103.254:
[Example 2] Set the 100M half duplex for the LAN1 interface:
After you set the connection feature or IP address for the LAN interface, the system
must be restarted in order for the new settings to take effect.