Filter
Top Products
3–19Configuring the Printer
Delete Configuration
Delete configuration allows you to delete a configuration file. You can delete one
or all of your eight customized configurations.
Configuration 0 is a factory-preset configuration and cannot be changed or
deleted.
Power-Up Configuration
Power-up configuration allows you to specify one of nine (0–8) configurations to
be used upon printer power-up. The factory default for power-up is configuration
0.
Protect Configs
The Protect Configs (protect saved configuration) option allows you to specify
whether or not a new configuration should “overwrite” an existing configuration
when you activate the “Save Config” option:
• When disabled (default), the new configuration overwrites the existing
configuration. There is no protection set for the former configuration.
• When enabled, the new configuration does not overwrite the existing
configuration, and the following is
displayed:
CONFIG. EXISTS
DELETE FIRST
Therefore, you must delete an existing configuration before trying to save
a new configuration, as it is protected.
Name Configs
You may specify a 15 character name which can be used to identify a
configuration. The name you enter for a configuration will be used in the Load
Config., Save Config., Delete Config., and Power-Up Config. menus. The names
can only be cleared by using the Reset Cfg Names Menu.
When you move into the Name Configs. menu, the top line of the display shows
the current configuration name. The second line of the display is initially the same
as the top line. You can modify the second line of the display without affecting the
top line until the ENTER key is pressed, which sets the modified name.