Filter
Top Products
3–36 Configuring the Printer
Idle Response
Values: Enable or Disable (default)
If you enable the Series 1 Idle parameter, then whenever the buffer is less than
75% full, the printer sends a response character to the host every two seconds.
NOTE: This parameter is used only with the SERIES 1, 1 CH and SERIES
1, 2 CH protocols. See page 3–31 for more information.
One Char Enquiry
Values: Enable or Disable (default)
The One Char Enquiry mode uses the Poll Character to detect a request from the
host and sends a response back to the host. This option also allows you to turn
this feature on and off.