Filter
Top Products
3–53Configuring the Printer
5. To convert a font file, enter the following at the DOS prompt on the
computer, for example:
CNVT2FLS
custom.sf custom.dwn custom.sf A FONT
<Return>
where
custom.sf
is the name of one of the font files you want to
convert. This command converts the specified font file, creating the
downloadable file
custom
.dwn.
6. Repeat step 5 for any additional font files to be converted.
7. To convert a setup file, enter the following at the DOS prompt, for
example:
CNVT2FLS
setup.ptx setup.dwn setup.ptx A
<Return>
where
setup.ptx
is the name of one of the setup files you want to
convert. This command converts the specified setup file, creating the
downloadable file
setup
.dwn.
8. Repeat step 7 for any additional setup files to be converted.
9. To convert other kinds of files (a logo or form file, for example), enter the
following at the DOS prompt, for example:
CNVT2FLS my_logo.xxx my_logo.dwn my_logo.lgo A <Return>
where
my_logo.xxx
is the name of one of the form or logo files you
want to convert. This command converts the specified logo or form file,
creating the downloadable file
my_logo
.dwn.
10. Repeat step 9 for any additional logo and form files to be converted.
11. Proceed to the next section to download the converted files.
IMPORTANT
Be sure that you always enter the “A” parameter on the CNVT2FLS
command line, as indicated above.