Filter
Top Products
8 Table Of Contents
GigWorks MKII-16 Switch Model MKII-BASE16
59003-01 Rev. A Installer's/User's Manual
Labeling Requirements
There are no caution or danger labels required for use of the optical GBIC since it
is a Class 1 laser component assembly. Within the U.S., the only laser safety label
required is the certification label that already appears on the plastic retainer of the
optical GBIC assembly. Outside of the U.S., the IEC 825 laser safety standard
requires that the system level product have a Class 1 information label
permanently attached and clearly visible whenever access to the optical ports is
possible. This label is supplied with the equipment and applied by the user during
the installation procedure. Refer to the Installation section of this manual. An
example of the IEC Class 1 information label and its dimensions, suitable for use
in most European countries, is shown below. The label consists of black printing
on a yellow background. The languages represented on this example label are
English, German, Finnish, and French and represent the minimum set for
acceptance of a Class 1 product in most European countries.
CLASS 1 LASER PRODUCT
TO IEC 825 (1984) + CENELEC HD 482 S1
LASER KLASSE 1
LUOKAN 1 LASERLAITE
APPAREIL A LASER DE CLASSE 1
G3
A
G3
G2
B
R
Dimensions in mm
A x B
G2
G3
R
26 x 52 4 4 2
52 x 105 5 5 3.2
74 x 148 6 7.5 4
Laser Safety Information