Q-Logic MKII-BASE16 Switch User Manual


 
GigWorks MkII-16 Switch Model MKII-BASE16
Installer's/User's Manual 59003-01 Rev. A
Switch Management 3-57
Managing the Switch Using SNMP
switch element
fcFeModuleTable — Module Table — a table of information about each
module in the switch element
fcFPortConfigTable — Port Configuration Table — a table of the current
configuration parameters for each port in the switch element
Operation Group Tables
fcFPortOperTable — F_Port Operations Table — a table of the operational
values of each port in the switch element
fcFPortFlogiTable — F_Port Login Table — a table of the service
parameters defined during the last login
fcFPortPhysTable — F_Port Physical Level Table — a table giving the
physical status of each port in the switch element
Error Group Tables
fcFPortErrorTable — F_Port Error Table — a table of error counts for each
port in the switch element
Account Group Table
anMkiiAccounting — a table of traffic statistics for each Fibre Channel port
Capability Group Tables
fcFPortCapTable — Port Capabilities Table — a table of configuration
parameters supported by each port in the switch element
MKII Utility MIB
anMKiiUtility — an Ancor enterprise-specific MIB for MKII Switch
management Functions
Configuring SNMP
The Switch management configuration file defines the following SNMP
parameters:
snmpReadCommunity The SNMP community name to be recognized for
SNMP Get and GetNext requests. By default this is the string
“public”.
snmpWriteCommunityThe SNMP community name to be recognized for
SNMP Set requests. By default this is the string “private”.
snmpTrapCommunity The SNMP community name to be used in SNMP
Trap messages. By default this is the string “public”.
snmpName The value of the SNMP Systems Group SysName variable. This is