Filter
Top Products
GigWorks MkII-16 Switch Model MKII-BASE16
Installer's/User's Manual 59003-01 Rev. A
Switch Management 3-1
Section 3 Switch Management
Introduction
The Switch supports management through:
• the Windows NT™ or Windows 95™-based GigWorks MKII Switch
Utilities,
• a Trivial File Transfer Protocol (TFTP) server, and
• a built-in SNMP Agent.
• Optionally, the GigWorks MKII Switch Web-Based Management Interface
application is also available. This management interface is a Web-based (Java)
application.
The Switch Utilities require an Ethernet connection to each managed chassis. The Web-
based Switch management application can manage multiple fabrics and can
manage multi-chassis fabrics through an Ethernet connection to any one chassis
in the fabric. Contact your Ancor sales representative or sales engineer for
information about the Web-based Switch management application.
GigWorks MKII Switch Utilities
The GigWorks MKII Switch Utilities allows you to:
• Set up the connection between the Ethernet port on a PC and the Ethernet port on
the Switch and track the communication that takes place over this connection
• Configure the Switch Management interface with its IP network configuration
parameters and SNMP configuration parameters
• Configure the Fabric Number and Chassis Number
• Configure the Chassis Stage Type for multistage fabrics
Cross-Connect or
Input-Output/Transfer (IOT)
• Configure the Fibre Channel Timeouts
RATOV
EDTOV
• Configure the desired Chassis State and read the actual Chassis State
On Line
Off Line
Test