Filter
Top Products
GigWorks MKII-16 Switch Model MKII-BASE16
Installer's/User's Manual 59003-01 Rev. A
Table Of Contents iii
Table Of Contents
Preface
1 How to Use This Manual
1 Intended Audience
2 Related Materials
2 Ancor Customer Service
3 Safety Notices
3 Communications Statements
6 Laser Safety Information
9 Accessible Parts
1. GigWorks™ MKII-16 Switch Model MKII-BASE16, General Description
1-1 GigWorks™ MKII-16 Switch Model MKII BASE16 General Description
1-1 Major Fibre Channel Port Features
1-2 Major Switch Management Features
1-4 Major Switch Chassis Features
1-5 Fibre Channel Ports
1-8 Front Panel Controls
1-8 Power Button
1-8 Continuous Test Button
1-8 Front Panel LEDs
1-8 Heartbeat LED (Yellow)
1-9 Logic Power Good LED (Green)
1-9 Power Supply Fail LED (Red)
1-9 Over Temperature LED (Red)
1-9 Port Logged-In LED (Green)
1-10 Port Activity LED (Yellow)
1-10 Chassis Back
1-10 AC Input Power Connector and Fuses
1-11 Power Supply(s)
1-12 Chassis Switch Panel
1-12 Switch Management Connector
2. Installation
2-1 Installation
2-1 1. Unpack/Inventory
2-2 2. Place or Mount the Equipment
2-4 3. Apply the IEC Class 1 Laser Information Label (If the installation is in Europe)
2-4 4 Install GBICs
2-5 5. Connect to AC Power
2-7 6. Check the Power On Self Test (POST) Results
2-8 7. Cable N or NL_Port Adapters to the Switch
2-12 Operating the Switch