Quatech INTERBUS S Network Card User Manual


 
RS232,TTY,RS485 750-650,651,653
:$*2Ç,2 Ç6<67(0
1
RS232C Interface, TTY Interface -20 mA Current Loop
RS485C Interface
PN 750-650, 750-651, 750-653, 750-650/000-001
Technical Description:
This technical description is only valid for hardware and software versions X X X X 2 C
0 3----. The product series number is printed on the right side of the module.
The operational mode described below is the presetting.
The following description is preliminary and is applicable to the factory configuration.
Many other operational modes are possible (please contact WAGO for the
corresponding settings).
Attention:
Some modules do not provide all power jumper contacts (e.g. 4-channel)! A module
which needs all contacts (e.g. 2 channel digital) cannot be connected to the right hand
side of modules which do not have 3 power jumper contacts.
The interface module is able to run with all WAGOÇI/OÇSYSTEM buscouplers
(except for the economy type).