Filter
Top Products
Input for thermocouple modules 750-462,469
:$*2Ç,2 Ç6<67(0
4
The numerical formats
All temperature values are represented in a uniform numerical format. In the default
setting (type K) one Bit corresponds to 0.1°C. The output value corresponds to the
temperature range of each sensor as defined according to standards. By using a
configuration tool, the output formats can be chosen. The linearization can be switched
off and the building of the reference temperature can be switched off also. The
following table identifies the numerical format on the default range (type K).
Temp.
°C
Voltage
(uV)
Binary Value
Hex. Dec.
850 35314 0010 0001 0011 0100 2134 8500
100 4095 0000 0011 1110 1000 03E8 1000
25,5 1021 0000 0000 1111 1111 00FF 255
0,1 4 0000 0000 0000 0001 0001 1
0 0 0000 0000 0000 0000 0000 0
-0,1 -4 1111 1111 1111 1111 FFFF -1
-25,5 -986 1111 1111 0000 0001 FF01 -255
-100 -3553 1111 1100 0001 1000 FC18 -1000
Table 2: Numerical formats