Filter
Top Products
Stamp
123
2
F
Change the stamp position, size
or density.
If you do not wish to change, go to
step G.
To change the stamp position,
size or density
A Press the [Change] key.
B Select the desired position,
size and density.
C Press the [OK] key.
G
After you specified all the desired
settings, press the [OK] key.
H
Press the [Cancel] key.
Note
❒ To cancel the settings, press the
[
Cancel
] key.
I
Set your originals, then press the
{
{{
{Start}
}}
} key.
User Stamp
32 MB of memory is required to use
this function (If the machine is
equipped with the Printer unit, 32 MB
memory is not required.).
Up to four messages which you use
frequently can be stored in the ma-
chine's memory and stamped on cop-
ies.
Preparation
Before using this function, you
have to store your messages with
the User Tools. ⇒ P.125 “Program/
Delete User Stamp”.
Limitation
❒ You cannot use the bypass tray
with this function.
❒ One message can be stamped at a
time.
Note
❒ You can change the print page
with the User Tools.
AdonisC2_AEcopy110F_FM.book Page 123 Wednesday, October 3, 2001 1:43 PM