Filter
Top Products
Troubleshooting
200
4
y Removing Punch Waste
Note
❒ While “Hole punch receptacle is
full.” is displayed, you cannot use
the Punch function.
A
Open the front cover of the 2 Tray
finisher.
B
Pull out the punch waste box and
remove punch waste.
C
Reinstall the punch waste box.
Note
❒ If you do not, “Hole punch re-
ceptacle is full.” is still dis-
played.
D
Close the front cover of the 2 Tray
finisher.
“Hole Punch Receptacle Full.” dis-
appears.
Note
❒ If the message is still displayed,
reinstall the punch waste box.
AdonisC2_AEcopy110F_FM.book Page 200 Wednesday, October 3, 2001 1:43 PM