Ricoh 1035 All in One Printer User Manual


 
Copying
62
2
Programs
You can store frequently used copy
job settings in machine memory, and
recall them for future use.
Storing Your Settings
You can store your settings you
frequently use.
Deleting A Program
You can delete a stored program.
Recalling A Program
You can recall a stored program.
Note
You can store up to 10 programs.
You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset is made, or immediately after
the operation switch is turned on.
Paper settings are stored based on
paper size. So if you place more
than one paper tray of the same
size, the paper tray prioritized
with the User Tools (System Set-
tings) will be selected first.Refer to
the System Settings manual.
Programs are not cleared by turn-
ing the power off or by pressing
the {Clear Modes} key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
Storing a Program
A
Edit the copy settings so that all
functions you want to store in this
program are selected.
B
Press the {
{{
{Program}
}}
} key.
C
Press the [Register] key.
D
Press the program number you
want to store.
Note
Program numbers with m al-
ready have settings in them.
Reference
P.63 Changing a Stored Pro-
gram.
E
Enter the program name with the
letter keys on the display panel.
AdonisC2_AEcopy110F_FM.book Page 62 Wednesday, October 3, 2001 1:43 PM