Ricoh 1035 All in One Printer User Manual


 
229
6. REMARKS
Do's And Don'ts
R
CAUTION:
Important
If you want to unplug the power
cord or turn off the main power
switch, make sure that the remain-
ing memory space indicates 100%
on the display for facsimile mode.
While the machine is unplugged,
you can neither send nor receive a
fax.
Reference
For details, see the Facsimile Refer-
ence.
When you use this machine for a
long time in a confined space with-
out good ventilation, you may no-
tice an odd smell. To keep the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.
Do not press areas on or around
the fusing unit. These areas get hot.
After making copies continuously,
the exposure glass may feel
warmthis is not a malfunction.
You might feel warm around the
ventilation hole. This is caused by
exhaust air, and is not a malfunc-
tion.
Do not turn off the operation
switch while copying or printing.
Make sure that all copying or
printing has finished.
The machine might fail to produce
good copy images if condensation
forms inside the machine due to
rapid temperature change.
Do not open the covers of machine
while copying or printing. If you
do, misfeeds might occur.
Do not move the machine while
copying or printing.
If you operate the machine im-
properly or a failure occurs on the
machine, your machine settings
might be lost. Be sure to take a note
of your machine settings.
Supplier shall not be liable for any
loss or damages resulting from a
failure on the machine, loss of ma-
chine settings, and use of the ma-
chine.
Unplug the power cord from the
wall outlet before you move the
equipment. While moving the
equipment, you should take care
that the power cord will not be
damaged under the equipment.
AdonisC2_AEcopy110F_FM.book Page 229 Wednesday, October 3, 2001 1:43 PM