Filter
Top Products
User Tools (System Settings)
52
4
❖
❖❖
❖ Print Priority
Print priority is given to the mode selected.
Reference
See p.32 “Multi-Access”.
Note
❒ Default: Display Mode
❒ When the optional finisher is installed, you can specify an output tray to
which documents are delivered.
• p.53 “Output: Copier”
• p.53 “Output: Document Server”
• p.54 “Output: Printer”
❖
❖❖
❖ Function Reset Timer
When using the multi-access function (See p.32 “Multi-Access”), you can set
the length of time the machine waits before changing modes. This is useful if
when you are making many copies and need to change the settings for each
copy. By setting a longer reset time, you can prevent being interrupted by oth-
er functions.
Note
❒ Default: 3 seconds
❒ The Function Reset Timer setting will not be effective if Print Priority is
given to Interleave Print. See p.52 “Print Priority”.
❖
❖❖
❖ Interleave Print
You can set the timing for changing modes when [Print Priority] has been set to
[Interleave].
Note
❒ Default: 10 sheet(s)
❒ Values set may change depending on the timing of printing.
❖
❖❖
❖ Output Tray Setting
You can set the way or timing for switching the output tray.
• Output Tray
You can set the way in which the output tray is switched.
Note
❒ Default: According to Function Setting
❒ You can select Auto Change when Print Priority is set to Job Order. See
p.52 “Print Priority”.
• Change Output Tray
You can set the timing for switching the output tray.
Note
❒ Default: When Tray is Full
MarC25-AE_gsg_F_pre_FM.book Page 52 Thursday, October 21, 2004 5:20 PM