Filter
Top Products
User Tools (System Settings)
58
4
❒ When [At Mode Selected] is selected, the slip sheet settings are only dis-
played when the cover function or slip sheet function is selected.
❒ When [Interposer Tray] has been selected in the Slip Sheet 2 tray settings,
“Copying Method in Duplex” will not be displayed.
❒ OHP slip sheets cannot be copied when using the interposer.
Reference
“Slip Sheets”, Copy Reference
❖
❖❖
❖ Printer Bypass Paper Size
You can specify the size of the paper in the bypass tray when printing data
from the computer.
Note
❒ Default: A4K
Timer Settings
❖
❖❖
❖ Auto Off Timer
The machine turns off automatically to conserve energy after a specified time
has elapsed following job completion. This function is called “Auto Off”.
The machine status after Auto Off operation is referred to as “Off mode” or
“Sleep mode”. For the Auto Off Timer, specify the time to elapse before Auto
Off.
Note
❒ Default: 1 minute(s)
❒ When in “Off mode” or “Sleep mode”, the machine is ready for use within
30 seconds.
❒ The time can be set from 1 to 240 minutes using the number keys.
❖
❖❖
❖ Energy Saver Timer
You can set the time that the machine waits before switching to lower power
mode after copying has finished or the last operation is performed.
The time can be set from 1 minute to 240 minutes using the number keys.
Note
❒ Default: 15 minute(s)
❖
❖❖
❖ Panel Off Timer
You can set the time that the machine waits before switching the panel off af-
ter copying has finished or the last operation is performed.
Note
❒ Default: 1 minute(s)
❒ The warm up time for making a copy from standby mode is 0 seconds.
❒ The interval time can be set from 10 to 240 minutes using the number keys.
MarC25-AE_gsg_F_pre_FM.book Page 58 Thursday, October 21, 2004 5:20 PM