Filter
Top Products
Advanced Features
91
1
G When a password is required, press [Password (SID)], enter the password
with the number keys, and then press [OK].
H Press [Exit].
I Press the {Start} key.
If you use Immediate Transmission and the fax machine at the destination
does not support the SUB Code function, a message will appear on the display
to inform you of this. When this happens, press [Exit] to cancel the transmission.
Note
❒ You can enter numbers, p, q, and spaces.
❒ Make sure the number of digits in the SUB Code matches the specification
of the machine to which you are sending. For the maximum number of dig-
its for the SUB Code of this machine, see “Maximum Values”.
❒ You can store SUB Codes as well as names and fax numbers in the destina-
tion list and Keystroke Programs.
❒ The SUB Code is printed on lists and reports. This is possible only if the
SUB Code is specified in [Adv. Features] using the number keys.
Reference
p.277 “Registering and Changing Keystroke Programs”
p.287 “Maximum Values”
“Facsimile Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
Setting a password
There are times when you may want to use an “SID” (Sender ID) when sending
confidential faxes with the SUB Code function. When you use a Transfer Box
that has a password, enter the SID Code as the password.
Note
❒ For the maximum number of digits for the SID Code, see “Maximum Values”.
❒ You can enter numbers, p, q, and spaces.
❒ You can store SID Codes as well as names and fax numbers in the destination
list and Keystroke Programs.
❒ The SID Code is printed on lists and reports. This is possible only if the SID
Code is specified in [Adv. Features] using the number keys.
Reference
p.277 “Registering and Changing Keystroke Programs”
p.287 “Maximum Values”
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gener-
al Settings Guide